Dead-end of Guy wire
May 4,2017hits:2498

 

General Recommendations

Dead ends of Guy wire are recommended for stay/guy terminations on wood/concrete pole Distribution construction. They are suitable for stay rod, stay insulator and pole top attachment. Single, multiple and flying stays can be terminated.

 

Material

Dead-ends of guy wire are made of the same basic material as the strand to which they are applied. The typical material are galvanized steel wire, aluminum clad steel wire, copper clad steel wire.

 

Application and inspection

Ensure the correct size fitting is used. For detailed method of installation refer to application instructions. Dead-ends of guy wire may be removed and reapplied three times if necessary on new.

 

Production Characteristics

  • Cross-over marks: for initial positioning of the legs.
  • Color code: assists in identification of strands size.
  • Identification label: Shows catalogue number and strand diameter range.
  • Lay direction: Must be same as that of the outer layer of the strand to which it is applied

 

Dead-ends of guy wire: Galvanized Steel

Cat# Strand Size (inches) Strand construction Strand Diameter (inches) Approx. Wt./Lbs. per100 Units per carton Length (inches) Color code
KDE-B102 3/16 7W .186 30 100 20 Red
    7W .195        
KDE-B103 7/32 7W .216 38 50 24 Green
KDE-B104 1/4 3W .259 44 50 25 Yellow
    7W .240        
KDE-B105 9/32 7W .279 52 50 28 Blue
KDE-B106 5/16 3W .312 78 50 31 Black
    7W .312        
    7W .327        
KDE-B107 3/8 3W .356 102 50 35 Orange
    7W .360        
KDE-B108 7/16 7W .435 160 20 38 Green

Left-hand lay standard
KDE-Axxx: Material is class A galvanized steel wire
KDE-Bxxx: Material is class B galvanized steel wire
KDE-Cxxx: Material is class C galvanized steel wire

 

Dead-ends of guy wire: Aluminum Clad steel wire

Cat. # Strand Dia. (inches) Nominal Strand Size Approx. Wt./Lbs. per100 Units per carton Length (inches) Color code
KAWDE-1502 .174 3# 12 21 100 18 Orange
KAWDE-1508 .220 4M 40 50 21 Green
  .220 3# 10        
KAWDE-1510 .247 3# 9 40 50 24 Yellow
  .242 6M        
KAWDE-1513 .277 3# 8 44 50 24 Blue
  .272 6M        
KAWDE-1516 .311 3# 7 58 50 26 Black
  .306 10M        
  .306 5/16”-7#10        
KAWDE-1518 .330 11.5M 60 50 26 Green
KAWDE-1519 .349 3# 6 82 50 29 Yellow
  .343 12.5M        
  .343 11/32”-7#9        
KAWDE-1520 .363 14M 106 50 31 Blue
KAWDE-1522 .392 3# 5 110 50 32 Orange
  .385 3/8”-7# 8        
  .386 16M        
KAWDE-1524 .417 18M 148 25 34 Black
KAWDE-1525 .433 7/16”-7#7 160 25 36 Green
KAWDE-1526 .444 20M 220 10 37 Yellow
KAWDE-1528 .486 1/2”-7#6 230 10 39 Blue
KAWDE-1530 .519 25M 310 10 43 Red
KAWDE-1531 .546 7# 5 320 10 44 Yellow

Left hand lay standard