CROSS-OVER MARKS: Indicate starting point for application.
COLOR CODE AND LENGTH: Assist in identification of strand size,
IDENTIFICATION TAPE: Shows big-grip dead-end type, nominal sizes.
SHORT LEG/LONG LEG: Identifies rods belonging to each leg, after application. During application, the short leg should be applied first.
Rated Holding Strength (RHS): Big-Grip dead-ends are designed to develop the maximum loads published on the catalog pages only for those specific strands listed.
 

Considerations:
Our products are intended for use by trained craftspeople only.
1.This product SHOULD NOT BE USED by anyone who is not familiar With and trained in the use of it.
2.when working in the area of energized lines with this product,EXTRA CARE should be taken to prevent accidental electrical contact.
3.For PROPER PERFORMANCE AND PERSONAL SAFETY be sure toSelect the proper type and size PREFORMED Product before application.
4.PREFORMED products are precision devices.To insure proper performance,They should be stored in cartons under cover and handled carefully.