Guy-grip dead-end
Feb 28,2017hits:6721

CROSS-OVER MARKS: (A)-indicate starting point for application on smaller diameter fittings described on the  reserve side of this page.
(B)-Indicates alternate starting point for application on larger diameter fittings described on the reverse side of this page.
CABLED LOOP: Furnished as standard, all sizes.
PITCH LENGTH: One complete wrap
COLOR CODE AND LENGTH: Indicates the starting point of installation, as well as help identify guy-grip dead-end model
IDENTIFICATION TAPE: Shows guy-grip dead-end type, nominal sizes.
SHORT LEG/LONG LEG: Identifies rods belonging to each leg,after application. During application, the short leg should be applied first.

Our products are intended for use by trained craftspeople only.
1.This product SHOULD NOT BE USED by anyone who is not familiar With and trained in the use of it.
2.when working in the area of energized lines with this product,EXTRA CARE should be taken to prevent accidental electrical contact.
3.For PROPER PERFORMANCE AND PERSONAL SAFETY be sure toSelect the proper type and size PREFORMED Product before application.
4.PREFORMED products are precision devices.To insure proper performance,They should be stored in cartons under cover and handled carefully.